How to Fix Windows Update Error Code 0x80070437 on Windows 10?

If you’ve been seeing the 0x80070437 error code when trying to run Windows Update on your Windows 10 computer, don’t worry. This is a relatively common error and there are a few different ways that you can fix it. In this article, we’ll walk you through a few different methods that you can use to get your computer updating again.

If you’re seeing the 0x80070437 error when trying to update Windows, it’s likely due to a problem with the Windows Update service. The service may be experiencing an issue or be in a bad state, which is preventing it from working properly. Fortunately, there are a few things you can try to fix the problem.

First, try restarting the Windows Update service. To do this, open the Services window (press the Windows key + R, type services.msc, and press Enter), find the Windows Update service, right-click it, and select Restart.

If that doesn’t work, try resetting the Windows Update components. This will essentially reset the Windows Update service, and should hopefully fix the problem. To do this, open the Command Prompt as administrator (press the Windows key + X, then select Command Prompt (Admin)), and run the following commands:

net stop wuauserv
net stop cryptSvc
net stop bits
net stop msiserver

ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
ren C:\Windows\System32\catroot2 Catroot2.old

net start wuauserv
net start cryptSvc
net start bits
net start msiserver

Exit the Command Prompt, and try updating Windows again.

If you’re still seeing the 0x80070437 error, it’s possible that there’s a problem with the Windows Update files themselves. In this case, the best thing to do is to delete the Windows Update files, and then try updating again. To do this, open the Command Prompt as administrator, and run the following commands:

net stop wuauserv
net stop cryptSvc
net stop bits
net stop msiserver

ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
ren C:\Windows\System32\catroot2 Catroot2.old

net start wuauserv
net start cryptSvc
net start bits
net start msiserver

Exit the Command Prompt, and try updating Windows again.

If you’re still seeing the 0x80070437 error, it’s possible that there’s a problem with your Windows Update settings. To fix this, open the Settings app (press the Windows key + I), then go to Update & Security > Windows Update, and click Check for updates. If there are any updates available, install them, then try updating again.

If you’re still seeing the 0x80070437 error, it’s possible that there’s a problem with your internet connection. To fix this, open the Settings app (press the Windows key + I), then go to Network & Internet > Status, and click the Diagnose button. This will run the Windows Network Diagnostics tool, which will hopefully fix any problems with your internet connection.

If you’re still seeing the 0x80070437 error, it’s possible that there’s a problem with your computer’s date and time settings. To fix this, open the Settings app (press the Windows key + I), then go to Time & Language > Date & time, and turn on the Set time automatically and Set time zone automatically options.

If you’re still seeing the 0x80070437 error, it’s possible that there’s a problem with your Windows Update registry key. To fix this, open the Registry Editor (press the Windows key + R, type regedit, and press Enter), then navigate to the following key:

HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate

If the WindowsUpdate key doesn’t exist, create it by right-clicking the Windows key, selecting New > Key, and typing WindowsUpdate.

With the WindowsUpdate key selected, right-click in the right pane, select New > DWORD (32-bit) Value, and type DisableOSUpgrade.

Double-click the DisableOSUpgrade value to open it, then change the Value data to 1 and click OK.

Exit the Registry Editor, and try updating Windows again.

If you’re still seeing the 0x80070437 error, it’s possible that there’s a problem with your computer’s BIOS. To fix this, restart your computer, then press the F2 key (or the key your computer uses to enter the BIOS) to enter the BIOS. Once in the BIOS, look for an option to reset the BIOS to its default settings, then save your changes and exit. Once your computer has restarted, try updating Windows again.

If you’re still seeing the 0x80070437 error, it’s possible that your computer is infected with malware. To fix this, you’ll need to run a malware scan. We recommend using the Windows Defender tool, which is included with Windows. To run a scan with Windows Defender, open the Settings app (press the Windows key + I), then go to Update & Security > Windows Defender, and click the Scan now button.

If you’re still seeing the 0x80070437 error, it’s possible that there’s a problem with your computer’s hard drive. To fix this, you’ll need to run a disk check. To do this, open the Command Prompt as administrator (press the Windows key + X, then select Command Prompt (Admin)), and type the following command:

chkdsk C: /f /r

Press Enter, then restart your computer when prompted. Once your computer has restarted, try updating Windows again.

If you’re still seeing the 0x80070437 error, it’s possible that there’s a problem with your computer’s hardware. To fix this, you’ll need to run a hardware diagnostic test. To do this, restart your computer, then press the F2 key (or the key your computer uses to enter the BIOS) to enter the BIOS. Once in the BIOS, look for an option to run a hardware diagnostic test, and run it.

If you’re still seeing the 0x80070437 error, it’s possible that there’s a problem with your computer’s drivers. To fix this, you’ll need to update your drivers. You can do this manually by going to the manufacturer’s website and searching for the most recent driver for your device. However, this can be time-consuming and difficult. We recommend using Driver Easy. Driver Easy will automatically recognize your system and find the correct drivers for your devices, and it will download and install them automatically.

If you’re still seeing the 0x80070437 error, it’s possible that your computer is experiencing a hardware or software issue. In this case, the best thing to do is to contact Microsoft support for further assistance.

What Causes Error Code 0x80070437?

If you see the error code 0x80070437 on your Windows 10 computer, it means that the Windows Update process has failed. This can happen for a number of reasons, but most often it is caused by a corrupt or damaged update file, or a problem with the Windows Update service.

If you’re not sure what caused the error, the first thing you should do is try running the Windows Update troubleshooter. This is a built-in tool that can help fix some common problems with the update process.

If the troubleshooter doesn’t fix the problem, the next step is to try and manually install the update. You can do this by going to the Microsoft website and downloading the update file from there. Once you have the file, you can run it and install the update manually.

If you’re still seeing the error code 0x80070437, it’s likely that there is a more serious problem with your Windows Update service. In this case, the best thing to do is to contact Microsoft support for help.

How to Fix Error Code 0x80070437?

If you receive the error code 0x80070437 on your Windows 10 computer, it means that the Windows Update component is not working properly. This can be caused by a number of things, but most commonly it is caused by a corrupt or damaged system file. Luckily, there are a few easy ways to fix this problem.

First, try running the Windows Update Troubleshooter. This is a built-in tool that can help fix many common problems with the Windows Update service. To run the troubleshooter, open the Settings app and go to Update & Security > Troubleshoot. Then scroll down and select Windows Update and run the troubleshooter.

If that doesn’t fix the problem, you can try resetting the Windows Update components. This will essentially reset the Windows Update service and all its related components. To do this, open a Command Prompt window as administrator and run the following commands:

net stop wuauserv
net stop cryptSvc
net stop bits
net stop msiserver

ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
ren C:\Windows\System32\catroot2 Catroot2.old

net start wuauserv
net start cryptSvc
net start bits
net start msiserver

After running these commands, try checking for updates again and see if the problem has been fixed.

If you’re still having trouble, you can try using the Media Creation Tool to create a fresh installation of Windows 10. This will essentially give you a clean slate to work with and should fix any update problems you’re having. To use the Media Creation Tool, go to the Microsoft website and download the tool. Then run it and follow the prompts to create a bootable USB drive or ISO file. Once you have the USB drive or ISO file, you can use it to install Windows 10 on your computer.

What to Do If Error Code 0x80070437 persists?

If you see the error code 0x80070437 on your Windows 10 computer, it means that the Windows Update service is not running. This can happen for a variety of reasons, but most often it is because the service is not set to start automatically. To fix this, you need to change the startup type for the Windows Update service from Manual to Automatic.

To do this, open the Services manager (press the Windows key + R, type services.msc and press Enter), find the Windows Update service, right-click it and select Properties. In the Properties window, change the Startup type to Automatic and click Apply. Then, start the service by clicking Start.

If the service is already set to Automatic, but it still doesn’t start, you may need to try and start it from the command line. To do this, open a Command Prompt window as Administrator (press the Windows key + X and select Command Prompt (Admin) from the menu), and then type the following commands and press Enter after each one:

net start wuauserv
net start bits
net start cryptsvc

After you run these commands, try and run Windows Update again and see if the error persists.

Conclusion: How to Fix Windows Update Error Code 0x80070437 on Windows 10?

If you receive the error code 0x80070437 when trying to update Windows 10, it means that there is a problem with the Windows Update service. To fix this problem, you will need to restart the Windows Update service. Here’s how to do it:

1. Press the Windows key + R to open the Run dialog box.

2. Type “services.msc” and press Enter.

3. Find the “Windows Update” service and double-click it.

4. Click the “Stop” button.

5. Click the “Start” button.

6. Close the Services window.

After following these steps, try updating Windows 10 again. If you still receive the 0x80070437 error, you may need to reset the Windows Update components.