Fix: Windows stuck on BOOT Screen after installing new SSD

If you are facing the issue of Windows getting stuck on the boot screen after installing a new SSD, then this article is for you. Here we will discuss the possible causes for this issue and also provide some troubleshooting tips to help you fix it.

One possible reason for this issue could be that the boot order in the BIOS is not set correctly. Another reason could be that the SSD is not compatible with the Windows version that you are using.

If you are facing this issue, then the first thing you should try is to set the boot order in the BIOS correctly. If that doesn’t work, then you can try to update the SSD firmware. You can also try to install the Windows on the SSD again.

If nothing works, then you can contact the customer support of the SSD manufacturer for further assistance.

If you have installed a new SSD and you are stuck on the boot screen, there are a few things you can do to fix this problem.

First, make sure that the SSD is properly installed and connected to the motherboard. If it is, then try to boot into the BIOS and check the boot order. Make sure that the SSD is listed first.

If the SSD is still not being recognized, then you may need to update the BIOS. This can be done by downloading the latest BIOS update from the manufacturer’s website and installing it.

Once the BIOS is updated, try to boot into the SSD again. If it still does not work, then you may need to format the SSD and reinstall Windows.

What Causes This Error?

If you’ve installed a new SSD and boot up your computer only to be stuck on a Boot Screen, it’s likely because your BIOS is configured to boot from your old hard drive. This is an easy fix – simply change the boot order in your BIOS and restart your computer. If you’re not sure how to do this, consult your motherboard’s manual or contact the manufacturer for assistance.

How to Fix: Windows Stuck on BOOT Screen After Installing New SSD

If you’ve recently installed a new SSD on your Windows computer, you may have run into an issue where your computer gets stuck on the boot screen. This can be a frustrating problem, but luckily there are a few things you can try to fix it.

One possible cause of this issue is that your computer’s BIOS is not configured properly for your new SSD. To fix this, you’ll need to enter your BIOS and make sure that the SSD is selected as the primary boot device. If you’re not sure how to do this, consult your computer’s manual or the manufacturer’s website.

Another possible cause is that your SSD is not formatted correctly. This can happen if you didn’t format the drive properly when you installed it. To fix this, you’ll need to format the SSD from the Windows Disk Management tool.

If neither of these solutions works, it’s possible that there’s a problem with the SSD itself. In this case, you may need to contact the manufacturer for support.

Hopefully one of these solutions will fix the problem and you’ll be able to boot into Windows normally.

Conclusion

When you install a new SSD on your computer, you may find that your computer gets stuck on the boot screen. This can be a frustrating problem, but there are a few things you can try to fix it.

First, try booting into Safe Mode. To do this, restart your computer and press the F8 key before the Windows logo appears. This will bring up the Advanced Boot Options menu. From here, select Safe Mode and press Enter. If your computer boots into Safe Mode, then there may be a problem with a driver or service. Try disabling any new drivers or services that you may have installed before the problem started.

If Safe Mode doesn’t work, then you can try using the Startup Repair tool. To do this, insert your Windows installation disc and restart your computer. Press any key to boot from the disc, and then select Repair your computer. Select the operating system you want to repair, and then select Startup Repair. This will scan your computer for any problems and try to fix them.

If neither of these solutions works, then you may need to reinstall Windows. This should be a last resort, as it will erase all of the data on your hard drive. Before you do this, make sure to backup your important files.

If your computer is still getting stuck on the boot screen, then there may be a problem with your hardware. Try reseating your RAM and your SSD. If that doesn’t work, then you may need to replace your SSD.

Further Reading

If you’ve installed a new SSD in your computer and it’s become stuck on the boot screen, there are a few things you can do to fix it.

First, try booting into Safe Mode. To do this, restart your computer and press the F8 key repeatedly before the Windows logo appears. If you’re successful, you’ll see the Safe Mode menu. From here, you can troubleshoot and fix any issues that are preventing your computer from booting properly.

If Safe Mode doesn’t work, you can try resetting your computer’s BIOS. To do this, enter the BIOS setup utility and look for the option to reset the BIOS to its default settings. This option is usually located in the “Exit” or “Advanced” menu. Once you’ve reset the BIOS, try booting your computer again.

If neither of these solutions works, you may need to reinstall Windows. To do this, insert your Windows installation disc and boot from it. Choose the option to repair your computer and follow the prompts to reinstall Windows.

How to Prevent This Error in the Future

If you’ve installed a new SSD and Windows gets stuck on the boot screen, there are a few things you can do to fix the problem.

First, check to make sure that the SSD is properly installed and connected. If it is, then try booting into Safe Mode. To do this, press and hold the F8 key while your computer is booting up. Once you’re in Safe Mode, try restarting your computer and see if that fixes the problem.

If Safe Mode doesn’t work, then you can try using the System Restore feature to roll back your computer to a previous state. To do this, open the Control Panel and go to System and Security > Backup and Restore. Click on the “Restore my computer to an earlier time” option and select a restore point from before you installed the SSD. This should fix the problem.

If none of these solutions work, then you may need to reinstall Windows. Be sure to back up your files before you do this.