Fix: Ethernet controller error code 28

If you’re seeing an error code 28 for your Ethernet controller, don’t worry—it’s a relatively easy problem to fix. In this article, we’ll walk you through the steps to get your Ethernet controller up and running again.

If you’re troubleshooting your PC and see the error code “Ethernet controller error code 28,” it means that your computer is having difficulty connecting to the internet. This can be caused by a number of things, but most often it’s due to a problem with your network adapter or your network settings. In this article, we’ll show you how to fix this error so you can get back online.

Before we get started, though, it’s important to note that this error can also be caused by hardware issues. If you’re seeing this error on a regular basis, it’s a good idea to check your network adapter for any hardware problems.

What is an Ethernet controller error code 28?

If you see an error code 28 in Device Manager next to your Ethernet controller, it means that your computer is having trouble communicating with the controller. This can be caused by a number of things, including outdated drivers, hardware problems, or software conflicts.

If you’re seeing this error, the first thing you should do is try updating your Ethernet controller’s drivers. You can do this through Device Manager or by visiting your computer or controller manufacturer’s website.

If updating your drivers doesn’t solve the problem, there may be a problem with your hardware. Try inspecting your Ethernet cable and controller for any physical damage. If you find any, try replacing the damaged parts.

If you’re still seeing the error code 28, it’s possible that there’s a software conflict causing the problem. Try uninstalling any recent software updates or programs you’ve installed. If that doesn’t work, you may need to perform a clean install of your operating system.

How to fix an Ethernet controller error code 28

If you’re receiving an error code 28 for your Ethernet controller, it means that the driver for the controller is not installed properly. To fix this, you’ll need to reinstall the driver for the controller.

To do this, open up the Device Manager (you can do this by typing “device manager” into the Start menu). Find the Ethernet controller under the “Network Adapters” section, right-click on it, and select “Update Driver Software.”

Then, select “Browse my computer for driver software” and navigate to the location where you downloaded the driver for the controller. Once the driver is installed, restart your computer and the error should be fixed.

Conclusion

If you are receiving the error code 28 for your Ethernet controller, it is likely due to a driver issue. To fix this, you can try updating the driver for your controller. If that does not work, you may need to uninstall the controller and then reinstall it.

Further Reading

If you’re still seeing the error code 28 after trying the above methods, there are a few other things you can try. First, you can try uninstalling and then reinstalling the driver for your Ethernet controller. If that doesn’t work, you can try updating the driver. You can do this through Device Manager or by downloading and installing the latest driver from the manufacturer’s website. Finally, if none of the above methods work, you can try resetting your BIOS.

Contact Information

If you’re encountering the error code 28 for your Ethernet controller, there are a few potential solutions that you can try in order to fix the issue. First, you can try updating the driver for your Ethernet controller. If that doesn’t work, you can try uninstalling and then reinstalling the driver. Finally, you can try resetting your TCP/IP stack. If you’re still having problems after trying all of these things, you can reach out to your computer’s manufacturer for further assistance.